Serial Vs Parallel Dilution Method In Bod

Serial Dilution Method: Definition and Procedure Explained http://www.biologyexams4u.com/2013/12/serial-dilution-protocol-pdf.html.

A dilution solution contains solute (or stock solution) and a solvent (called diluent). These two components proportionally combine to create a dilution. You can identify a dilution solution by the amount of solute in the total volume, expressed as a proportion. For example, a chemical may be prepared in a 1:10 dilution of alcohol, indicating that a 10 mL bottle contains one milliliter of chemical and nine milliliters of alcohol.

You can calculate the necessary volume of each component to prepare a dilution solution. Smartscore x2 keygen generator.

In S:T format: dilution factor = T/S Diluting a sample twice This example explains the basic steps to use dilution factors forward and backward. Using them forward means finding the cell density after all the dilutions are performed, starting from the original solution. Using them backwards means finding out the original cell density, starting from the most diluted one. Remember this is only an illustration example (it’s impossible you’ll have exactly 11 cells in a beaker and they will definitely not be this big). • We have 11 cells in a beaker suspended into 15mL of water. • We add 10mL of water to the beaker • We now have 11 cells in the beaker into 25mL of water.

• We add an extra 15mL of water to the beaker. • We end up with still 11 cells in the beaker but they’re suspended into 40mL of water. Let’s do the calculations forward: The cell density of 1 is 11 cells / 15mL water = 0.7333 cells/mL. We want to find the cell density of 3 without redoing the calculations with cells, and using the previously calculated cell density. The final volume is 25mL and the initial volume is 15mL, so the dilution factor is 25/15 = 1.6667 (keep all your trailing sixes for accuracy).

We can now apply it to the original cell density: 0.73 / 1.6667 = 0.44 cells/mL; and we can check it using the original method: 11 cells / 25mL = 0.44 cells/mL. Same thing for the dilution from 3 to 5: the cell density of 3 is 0.44 cells /mL. The dilution factor in this step is 40mL / 25mL = 1.6. We divide the cell density by the dilution factor and we get: 0.44 / 1.6 = 0.275 cells/mL. Double checking: 11 cells / 40mL = 0.275 cells/mL 🙂.